Day: February 28, 2022

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.63-91-2,L-Phenylalanine,as a common compound, the synthetic route is as follows.

63-91-2, The commercially available raw materials L-phenylalanine (LOBA,99%) and D-methionine (LOBA, 99%) in the purest form were taken in an equimolar (1:1) ratio and dissolved in the double distilled water. After continuous stirring for 8 h at room temperature homogenous saturated solution was obtained which was then filtered in the vessel using whatman filter paper at room temperature. After a time span of30 days optically good quality crystals were harvested from the mother solution by solution evaporation method.

As the paragraph descriping shows that 63-91-2 is playing an increasingly important role.

Reference：
Article; Sangeetha; Jayaprakash; Nageshwari; Rathika Thaya Kumari; Sudha; Prakash; Vinitha; Lydia Caroline; Physica B: Condensed Matter; vol. 525; (2017); p. 164 – 174;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

UO2Cl4?·(H2terpy)2?·2Cl (2): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (63 mmol) acetonitrile was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 69percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

1148-79-4 2,2′:6′,2”-Terpyridine 70848, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, A solution of compound 9 (200mg, 0.39mmol), dimethyl 2,2?-bipyridine-4,4?-dicarboxylate (212mg, 0.78mmol), and potassium hexafluorophosphate (108mg, 0.585mmol) in dry 1,2-dichloroethane (20mL) was stirred at 40°C for 24h. The reaction mixture was concentrated under reduced pressure and the crude product was purified by column chromatography using ethyl acetate/ dichloromethane (1:1) to give compound 10 as a dark red solid (198mg, 50percent). 1H NMR (300MHz, CDCl3): delta 8.88 (s, 1H), 8.83 (s, 1H), 8.75 (s, 2H), 8.27 (d, J=6Hz, 1H), 8.02 (dd, J=1.5Hz, 1.5Hz, 1H), 7.80 (d, J=5.4Hz, 1H), 7.84 (d, J=6.3Hz, 1H), 7.76(dd, J=1.5Hz, 1.5Hz, 1H), 7.69 (dd, J=1.5Hz, 1.5Hz, 1H), 7.59?7.64 (m, 5H), 7.30(d, J=5.4Hz, 1H), 7.01?7.16 (m, 1H), 6.89 (q, J=5.4Hz, 1H), 6.52 (q, J=7.8Hz, 1H), 4.00 (s, 3H), 3.99 (s, 3H), 3.98 (s, 3H), 3.96 (s, 3H); 13C NMR (125MHz, CDCl3): delta 181.4, 164.3, 164.3, 164.1, 163.9, 162.1, 159.5 (d, JCF=252.1Hz), 157.9, 157.3, 156.6, 156.4, 155.4, 151.6, 150.7, 150.4, 145.6, 138.4, 137.2, 136.3, 135.8, 135.7, 135.4, 135.2, 128.1, 126.2, 126.1, 125.8, 125.7, 125.1, 122.8, 122.7, 122.1, 121.9, 121.6, 120.0, 119.0, 109.5 (d, JCF=22.7Hz), 53.4, 53.3, 53.2; HRMS (FAB): calcd. for C41H31FN5O8SRu [M+] 874.0921, found 874.0923.

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Li, Chung-Yen; Su, Chaochin; Wang, Hsiou-Hsuan; Kumaresan, Prabakaran; Hsu, Chia-Hsuan; Lee, I-Ting; Chang, Wei-Chun; Tingare, Yogesh S.; Li, Ting-Yu; Lin, Chia-Feng; Li, Wen-Ren; Dyes and Pigments; vol. 100; 1; (2014); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

71071-46-0, Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 1-liter, creased, 4-necked round bottom Pyrex flask equipped with mechanical stirrer, 250-milliliter (ml) addition funnel, temperature probe, heating mantle, and water-cooled total reflux condenser was used. The flask was initially charged with 200 grams (1.08 mole) of ADMA-10 (decyldimethylamine, available from Albemarle Corporation, Baton Rouge, LA), and 239 grams (1.08 mole) decyl bromide was placed in the addition funnel. The stirrer was turned on and the reactor was heated to 65C. The decyl bromide was added dropwise to the ADMA-10 as the temperature of the reactor was allowed to rise from 65C to 142C. The addition funnel was then charged with 110 grams of methanol, and the methanol was added dropwise to the solution as the temperature of the reactor was allowed to fall to 90C. After the entire volume of the methanol was added to the reaction mixture, the heat and stirring were ceased and the intermediate quaternary ammonium (quat-Br) solution was allowed to cool., 71071-46-0

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Patent; ALBEMARLE CORPORATION; WO2005/97729; (2005); A2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl4?·H2terpy?·H2O (1): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (19.8 mmol) HCl 6 M was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 77percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3).

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

A solution of (S)-(-)-alpha,alpha-diphenyl-2-pyrrolidinemethanol (240 mg, 0.97 mmol) and 2 M Borane-Dimethylsulfide complex (in THF, 3.4 mL, 6.8 mmol) in dry THF (50 mL) was stirred at rt under N2 for 16 h. A solution of 5-(4-Fluoro-phenyl)-3-oxo-pentanoic acid ethyl ester (2.03 g, 8.57 mmol) in dry THF (20 mL) was then added dropwise at rt over a period of 1 h. The resultant clear solution was stirred at rt for another 35 min and was then cooled to 0 C. in an ice bath. The reaction was quenched by the addition of EtOH (40 mL) and was concentrated under reduced pressure. The residue was taken up with EtOAc (100 mL) and washed successively with H2O (50 mL), 5% NaHCO3 (50 mL), brine (50 mL), and then dried over Na2SO4. Removal of the solvent afforded an oil, which was purified by flush column chromatography on silica gel. The intermediate S-5-(4-Fluoro-phenyl)-3-hydroxy-pentanoic acid ethyl ester was obtained as a colorless oil (1.33 g, 65%). 1H NMR (300 MHz, CDCl3) delta1.25 (t, 3H, J=7), 1.6-1.9 (m, 2H), 2.35-2.50 (m, 2H), 2.60-2.85 (m, 2H), 3.1 (d, 1H, J=5), 3.95-4.05 (m, 1H), 4.1-4.25 (m, 2H), 6.9-7.0 (m, 2H), 7.05-7.2 (m, 2H). ESMS calcd (C13H17FO3): 240.1; found: 241.1 (M+H)+.

22348-32-9, 22348-32-9 (R)-Diphenyl(pyrrolidin-2-yl)methanol 7045371, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Patent; Chen, Shoujun; Sun, Lijun; McCleary, Joel; US2003/60633; (2003); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, As the paragraph descriping shows that 118949-61-4 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.216018-58-5,[2,2′:6′,2”-Terpyridine]-4,4′,4”-tricarboxylic acid,as a common compound, the synthetic route is as follows.,216018-58-5

2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid3.65 g (10.0 mmol) of the compound (manufactured by Tateyama Kasei)Was placed in a 500 mL eggplant flask. continue,2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid,5 mL of concentrated sulfuric acid and 300 mL of methanol were added,The resulting solution was heated to reflux for 6 hours.The reaction solution thus obtained was filtered off and the resulting solid was dried under vacuum to give 3.42 g ofTo obtain trimethyl 2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylate.

The synthetic route of 216018-58-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; FUJIKURA LIMITED; YAMAGUCHI, TAKESHI; (16 pag.)JP5901496; (2016); B2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, As the paragraph descriping shows that 118949-61-4 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

128249-70-7, 2,6-Bis((R)-4-phenyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Zinc(II)tetrafluoroborate hydrate (16mg, 0.068mmol) was added to a solution of (R)-LPh (50mg, 0.135mmol) in acetonitrile (15cm3). The resultant colourless solution was stirred at room temperature for one hour, before the product was precipitated using excess diethyl ether. The white precipitate was collected using vacuum filtration. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.056g, 84%. Elemental microanalysis: found C, 56.7; H, 3.38; N, 8.99%: calcd for C46H38B2F8N6O4Zn C, 56.5; H, 3.92; N, 8.59%. 1H NMR (CD3CN): delta 4.75 (dd, 4H, 10.8, 8,9 Hz, CH), 5.23 (dd, 4H, 10.4, 8.9Hz, ox-H), 5.15 (t, 4H, 10.6Hz, ox-H), 6.76 (d, 8H, 7.2Hz, Ph H2/6), 7.09 (t, 8H, 7.2Hz, Ph H3/5), 7.22 (m, 4H, Ph H4), 8.04 (d, 4H, 7.9Hz, Py H3/5), 8.47 (t, 2H, 7.9Hz, Py H4)., 128249-70-7

As the paragraph descriping shows that 128249-70-7 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI