Month: February 2022

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, A solution of compound 9 (200mg, 0.39mmol), dimethyl 2,2?-bipyridine-4,4?-dicarboxylate (212mg, 0.78mmol), and potassium hexafluorophosphate (108mg, 0.585mmol) in dry 1,2-dichloroethane (20mL) was stirred at 40°C for 24h. The reaction mixture was concentrated under reduced pressure and the crude product was purified by column chromatography using ethyl acetate/ dichloromethane (1:1) to give compound 10 as a dark red solid (198mg, 50percent). 1H NMR (300MHz, CDCl3): delta 8.88 (s, 1H), 8.83 (s, 1H), 8.75 (s, 2H), 8.27 (d, J=6Hz, 1H), 8.02 (dd, J=1.5Hz, 1.5Hz, 1H), 7.80 (d, J=5.4Hz, 1H), 7.84 (d, J=6.3Hz, 1H), 7.76(dd, J=1.5Hz, 1.5Hz, 1H), 7.69 (dd, J=1.5Hz, 1.5Hz, 1H), 7.59?7.64 (m, 5H), 7.30(d, J=5.4Hz, 1H), 7.01?7.16 (m, 1H), 6.89 (q, J=5.4Hz, 1H), 6.52 (q, J=7.8Hz, 1H), 4.00 (s, 3H), 3.99 (s, 3H), 3.98 (s, 3H), 3.96 (s, 3H); 13C NMR (125MHz, CDCl3): delta 181.4, 164.3, 164.3, 164.1, 163.9, 162.1, 159.5 (d, JCF=252.1Hz), 157.9, 157.3, 156.6, 156.4, 155.4, 151.6, 150.7, 150.4, 145.6, 138.4, 137.2, 136.3, 135.8, 135.7, 135.4, 135.2, 128.1, 126.2, 126.1, 125.8, 125.7, 125.1, 122.8, 122.7, 122.1, 121.9, 121.6, 120.0, 119.0, 109.5 (d, JCF=22.7Hz), 53.4, 53.3, 53.2; HRMS (FAB): calcd. for C41H31FN5O8SRu [M+] 874.0921, found 874.0923.

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Li, Chung-Yen; Su, Chaochin; Wang, Hsiou-Hsuan; Kumaresan, Prabakaran; Hsu, Chia-Hsuan; Lee, I-Ting; Chang, Wei-Chun; Tingare, Yogesh S.; Li, Ting-Yu; Lin, Chia-Feng; Li, Wen-Ren; Dyes and Pigments; vol. 100; 1; (2014); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

118949-61-4, 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%., 118949-61-4

The synthetic route of 118949-61-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3002-77-5,2-Methyl-1,10-phenanthroline,as a common compound, the synthetic route is as follows.

0.29 g of Cu (NO3) 2 · 3H2O and 0.174 g of 2-methyl-1,10-phenanthroline were sequentially added to a mixed solution of 25 mL of methanol and 25 mL of acetonitrile,Stir constantly.After 8 hours the reaction was filtered,The mother liquor with ether diffusion,Let stand at room temperature,Several days to give a green bulk crystal Z5., 3002-77-5

As the paragraph descriping shows that 3002-77-5 is playing an increasingly important role.

Reference：
Patent; Capital Normal University; Lu Xiaoming; (52 pag.)CN106543209; (2017); A;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.216018-58-5,[2,2′:6′,2”-Terpyridine]-4,4′,4”-tricarboxylic acid,as a common compound, the synthetic route is as follows.,216018-58-5

2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid3.65 g (10.0 mmol) of the compound (manufactured by Tateyama Kasei)Was placed in a 500 mL eggplant flask. continue,2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid,5 mL of concentrated sulfuric acid and 300 mL of methanol were added,The resulting solution was heated to reflux for 6 hours.The reaction solution thus obtained was filtered off and the resulting solid was dried under vacuum to give 3.42 g ofTo obtain trimethyl 2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylate.

The synthetic route of 216018-58-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; FUJIKURA LIMITED; YAMAGUCHI, TAKESHI; (16 pag.)JP5901496; (2016); B2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

To (S)-diphenylprolinol (4.00 g, 15.8 mmol, 1.00 equiv) in CH2-Cl2 (40 mL) was added imidazole (3.22 g, 47.4 mmol, 3.00 equiv)at 0 C. TMSCl (5.00 mL, 39.5 mmol, 2.50 equiv) was added dropwiseand the reaction was stirred for 12 h at rt. MTBE (100 mL)was added to the reaction and the mixture was filtered. Theorganic phase was washed with H2O (50 mL) and saturated aqueousNaCl (2 50 mL), dried over MgSO4, filtered and concentratedunder reduced pressure to a colorless oil 11 (5.00 g, 15.3 mmol,97%). 1H NMR (400 MHz, CDCl3) d 7.54-7.46 (m, 2H), 7.42-7.36(m, 2H), 7.35-7.20 (m, 6H), 4.07 (t, J = 7.4 Hz, 1H), 2.98-2.75 (m,2H), 1.84-1.72 (m, 1H), 1.68-1.55 (m, 3H), 1.48-1.37 (m, 1H),0.06 (s, 9H) ppm. 13C NMR (101 MHz, CDCl3) d 146.83, 145.78,128.44, 127.61, 127.57, 127.53, 126.90, 126.73, 83.17, 65.42,47.16, 27.51, 25.06, 2.20 ppm. HR-MS (ESI): calculated for (C20H28-NOSi) [M+H]+: 326.1935, found: 326.1937.

22348-32-9, As the paragraph descriping shows that 22348-32-9 is playing an increasingly important role.

Reference：
Article; Murar, Claudia E.; Harmand, Thibault J.; Bode, Jeffrey W.; Bioorganic and Medicinal Chemistry; vol. 25; 18; (2017); p. 4996 – 5001;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

128249-70-7, 2,6-Bis((R)-4-phenyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Zinc(II)tetrafluoroborate hydrate (16mg, 0.068mmol) was added to a solution of (R)-LPh (50mg, 0.135mmol) in acetonitrile (15cm3). The resultant colourless solution was stirred at room temperature for one hour, before the product was precipitated using excess diethyl ether. The white precipitate was collected using vacuum filtration. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.056g, 84%. Elemental microanalysis: found C, 56.7; H, 3.38; N, 8.99%: calcd for C46H38B2F8N6O4Zn C, 56.5; H, 3.92; N, 8.59%. 1H NMR (CD3CN): delta 4.75 (dd, 4H, 10.8, 8,9 Hz, CH), 5.23 (dd, 4H, 10.4, 8.9Hz, ox-H), 5.15 (t, 4H, 10.6Hz, ox-H), 6.76 (d, 8H, 7.2Hz, Ph H2/6), 7.09 (t, 8H, 7.2Hz, Ph H3/5), 7.22 (m, 4H, Ph H4), 8.04 (d, 4H, 7.9Hz, Py H3/5), 8.47 (t, 2H, 7.9Hz, Py H4)., 128249-70-7

As the paragraph descriping shows that 128249-70-7 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

A solution of (S)-(-)-alpha,alpha-diphenyl-2-pyrrolidinemethanol (240 mg, 0.97 mmol) and 2 M Borane-Dimethylsulfide complex (in THF, 3.4 mL, 6.8 mmol) in dry THF (50 mL) was stirred at rt under N2 for 16 h. A solution of 5-(4-Fluoro-phenyl)-3-oxo-pentanoic acid ethyl ester (2.03 g, 8.57 mmol) in dry THF (20 mL) was then added dropwise at rt over a period of 1 h. The resultant clear solution was stirred at rt for another 35 min and was then cooled to 0 C. in an ice bath. The reaction was quenched by the addition of EtOH (40 mL) and was concentrated under reduced pressure. The residue was taken up with EtOAc (100 mL) and washed successively with H2O (50 mL), 5% NaHCO3 (50 mL), brine (50 mL), and then dried over Na2SO4. Removal of the solvent afforded an oil, which was purified by flush column chromatography on silica gel. The intermediate S-5-(4-Fluoro-phenyl)-3-hydroxy-pentanoic acid ethyl ester was obtained as a colorless oil (1.33 g, 65%). 1H NMR (300 MHz, CDCl3) delta1.25 (t, 3H, J=7), 1.6-1.9 (m, 2H), 2.35-2.50 (m, 2H), 2.60-2.85 (m, 2H), 3.1 (d, 1H, J=5), 3.95-4.05 (m, 1H), 4.1-4.25 (m, 2H), 6.9-7.0 (m, 2H), 7.05-7.2 (m, 2H). ESMS calcd (C13H17FO3): 240.1; found: 241.1 (M+H)+.

22348-32-9, 22348-32-9 (R)-Diphenyl(pyrrolidin-2-yl)methanol 7045371, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Patent; Chen, Shoujun; Sun, Lijun; McCleary, Joel; US2003/60633; (2003); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

To (S)-diphenylprolinol (4.00 g, 15.8 mmol, 1.00 equiv) in CH2-Cl2 (40 mL) was added imidazole (3.22 g, 47.4 mmol, 3.00 equiv)at 0 C. TMSCl (5.00 mL, 39.5 mmol, 2.50 equiv) was added dropwiseand the reaction was stirred for 12 h at rt. MTBE (100 mL)was added to the reaction and the mixture was filtered. Theorganic phase was washed with H2O (50 mL) and saturated aqueousNaCl (2 50 mL), dried over MgSO4, filtered and concentratedunder reduced pressure to a colorless oil 11 (5.00 g, 15.3 mmol,97%). 1H NMR (400 MHz, CDCl3) d 7.54-7.46 (m, 2H), 7.42-7.36(m, 2H), 7.35-7.20 (m, 6H), 4.07 (t, J = 7.4 Hz, 1H), 2.98-2.75 (m,2H), 1.84-1.72 (m, 1H), 1.68-1.55 (m, 3H), 1.48-1.37 (m, 1H),0.06 (s, 9H) ppm. 13C NMR (101 MHz, CDCl3) d 146.83, 145.78,128.44, 127.61, 127.57, 127.53, 126.90, 126.73, 83.17, 65.42,47.16, 27.51, 25.06, 2.20 ppm. HR-MS (ESI): calculated for (C20H28-NOSi) [M+H]+: 326.1935, found: 326.1937.

22348-32-9, As the paragraph descriping shows that 22348-32-9 is playing an increasingly important role.

Reference：
Article; Murar, Claudia E.; Harmand, Thibault J.; Bode, Jeffrey W.; Bioorganic and Medicinal Chemistry; vol. 25; 18; (2017); p. 4996 – 5001;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

71071-46-0, Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

71071-46-0, General procedure: A solution of compound 5 (400mg, 0.822mmol), [(eta6-p-cymene) RuCl2]2 (252mg, 0.411mmol), and Me4NCl (450mg, 4.11mmol) in anhydrous acetone (21mL) was stirred under a dark atmosphere at room temperature for 6h. The reaction mixture was filtered and the filtrate was evaporated to afford crude compound as a bright orange solid. The above intermediate (200mg, 0.373mmol), dimethyl 2,2?-bipyridine-4,4?-dicarboxylate (203mg, 0.746mmol), and potassium hexafluorophosphate (103mg, 0.56mmol) were dissolved in dry 1,2-dichloroethane (20mL) and the mixture was stirred at 60°C for 12h. The mixture was then concentrated under reduced pressure and the resulting crude product was purified by column chromatography using ethyl acetate/ dichloromethane (1:1) to give compound 6 as a dark red solid (233mg, 70percent). 1H NMR (300MHz, CDCl3): delta 8.89 (s, 1H), 8.85 (s, 1H), 8.79 (s, 1H), 8.74 (s, 1H), 8.39 (d, J=5.7Hz, 1H), 8.00?7.91 (m, 3H), 7.82 (m, 3H), 7.67 (dd, J=3.6Hz, 1.5Hz, 1H), 7.52 (dt, J=8.7Hz, 1.2Hz, 1H), 7.46 (d, J=7.5Hz, 1H), 7.32?7.19 (m, 5H), 7.13 (d, J=5.7Hz, 1H), 6.72 (dt, J=6.5Hz, 1.5Hz, 1H), 3.95 (s, 3H), 3.94 (s, 3H), 3.93 (s, 3H), 3.91 (s, 3H), 1.27 (s, 3H); 13C NMR (125MHz, CDCl3): delta 192.8, 164.6, 164.4, 164.2, 162.6, 157.9, 157.8, 156.5, 156.3, 155.6, 151.9, 151.4, 150.5, 149.8, 142.5, 142.4, 138.4, 137.3, 136.6, 135.6, 135.3, 135.0, 134.9, 129.4, 128.5, 127.9, 127.6, 126.3, 162.2, 125.8, 123.0, 122.9, 122.4, 120.4, 118.8, 53.6, 53.5, 53.4, 53.3, 15.5; HRMS (FAB):calcd. for C44H36N5O8RuS [M+] 896.1328, found 896.1321.

As the paragraph descriping shows that 71071-46-0 is playing an increasingly important role.

Reference：
Article; Li, Chung-Yen; Su, Chaochin; Wang, Hsiou-Hsuan; Kumaresan, Prabakaran; Hsu, Chia-Hsuan; Lee, I-Ting; Chang, Wei-Chun; Tingare, Yogesh S.; Li, Ting-Yu; Lin, Chia-Feng; Li, Wen-Ren; Dyes and Pigments; vol. 100; 1; (2014); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI