Day: March 18, 2022

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15862-19-8,5-Bromo-2,2′-bipyridine,as a common compound, the synthetic route is as follows.,15862-19-8

5-bromo-2,2-bipyridine (0.480 g, 2 mmol), 2-methylthiophene (0.401 g, 4 mmol) and KOAc (0.401 g, 4 mmol) in dryDMA (5 mL) were stirred under N2 at 150 C for 20 h in thepresence of Pd(OAc)2 (0.009 g, 2 mol%). After cooling the solution to room temperature, CH2Cl2 (15 mL) and an aqueoussaturated NH4Cl solution (10 mL) were added. The reactionsolution was extracted three times with 15 mL of CH2Cl2, andthe combined organic layers were washed three times with 10mL of water. The solvent was evaporated under reduced pressure, and the crude product was purified by using columnchromatography (silica; 5:1 v/v hexane:EtOAc) to afford compound 1 in 22% yield (111 mg). 1H NMR (CDCl3, 500 MHz): 8.89 (dd, 1H, J = 2.3 and 0.6 Hz, ArH), 8.68 (ddd, 1H, J = 4.7,1.7 and 0.8 Hz, ArH), 8.448.36 (m, 2H, ArH), 7.93 (dd, 1H,J = 8.3 and 2.4 Hz, ArH), 7.82 (td, 1H, J = 7.8 and 1.8 Hz,ArH), 7.30 (ddd, 1H, J = 7.4, 4.8 and 1.1 Hz, ArH), 7.24(d, 1H, J = 3.5 Hz, ArH), 6.826.77 (m, 1H, ArH), 2.54 (s,3H, ArCH3) ppm. HR-MS (ESI+) m/z [M + H]+ calcd. for[C15H13N2S]+ 253.0799; found: 253.0803.

As the paragraph descriping shows that 15862-19-8 is playing an increasingly important role.

Reference：
Article; Kamila, Mritunjoy; Cosquer, Goulven; Breedlove, Brian K.; Yamashita, Masahiro; Bulletin of the Chemical Society of Japan; vol. 90; 5; (2017); p. 595 – 603;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min)

22348-32-9, The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

A 20 mL two-necked round-bottomed flask was charged with 69.2 mg (0.23 mmol, MW: 301) of pybox- ip, 87.6mg(0.46 mmol, MW: 190.45) of CuI and 5.0 mL of anhydrous CH2Cl2. A slow stream of nitrogen was passed throughthe system, and the solution was stirred well at room temperature for 24 h by means of magnetic stirring bar. Theexcess CuI was filtered off and the solvent of the filtrate was removed under reduced pressure and a yellow solid wasformed. After drying in vacuum at room temperature, the yield of F was 76.0% (85.4 mg). The structure of thiscatalyst was not confirmed., 118949-61-4

The synthetic route of 118949-61-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Fakhruddin, Ahmad; Abu-Elfotoh, Abdel-Moneim; Shibatomi, Kazutaka; Iwasa, Seiji; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 196 – 205;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

UO2Cl4?·(H2terpy)2?·2Cl (2): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (63 mmol) acetonitrile was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 69percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

1148-79-4 2,2′:6′,2”-Terpyridine 70848, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl4?·H2terpy?·H2O (1): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (19.8 mmol) HCl 6 M was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 77percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3).

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

To (S)-diphenylprolinol (4.00 g, 15.8 mmol, 1.00 equiv) in CH2-Cl2 (40 mL) was added imidazole (3.22 g, 47.4 mmol, 3.00 equiv)at 0 C. TMSCl (5.00 mL, 39.5 mmol, 2.50 equiv) was added dropwiseand the reaction was stirred for 12 h at rt. MTBE (100 mL)was added to the reaction and the mixture was filtered. Theorganic phase was washed with H2O (50 mL) and saturated aqueousNaCl (2 50 mL), dried over MgSO4, filtered and concentratedunder reduced pressure to a colorless oil 11 (5.00 g, 15.3 mmol,97%). 1H NMR (400 MHz, CDCl3) d 7.54-7.46 (m, 2H), 7.42-7.36(m, 2H), 7.35-7.20 (m, 6H), 4.07 (t, J = 7.4 Hz, 1H), 2.98-2.75 (m,2H), 1.84-1.72 (m, 1H), 1.68-1.55 (m, 3H), 1.48-1.37 (m, 1H),0.06 (s, 9H) ppm. 13C NMR (101 MHz, CDCl3) d 146.83, 145.78,128.44, 127.61, 127.57, 127.53, 126.90, 126.73, 83.17, 65.42,47.16, 27.51, 25.06, 2.20 ppm. HR-MS (ESI): calculated for (C20H28-NOSi) [M+H]+: 326.1935, found: 326.1937., 22348-32-9

As the paragraph descriping shows that 22348-32-9 is playing an increasingly important role.

Reference：
Article; Murar, Claudia E.; Harmand, Thibault J.; Bode, Jeffrey W.; Bioorganic and Medicinal Chemistry; vol. 25; 18; (2017); p. 4996 – 5001;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, A solution of compound 9 (200mg, 0.39mmol), dimethyl 2,2?-bipyridine-4,4?-dicarboxylate (212mg, 0.78mmol), and potassium hexafluorophosphate (108mg, 0.585mmol) in dry 1,2-dichloroethane (20mL) was stirred at 40°C for 24h. The reaction mixture was concentrated under reduced pressure and the crude product was purified by column chromatography using ethyl acetate/ dichloromethane (1:1) to give compound 10 as a dark red solid (198mg, 50percent). 1H NMR (300MHz, CDCl3): delta 8.88 (s, 1H), 8.83 (s, 1H), 8.75 (s, 2H), 8.27 (d, J=6Hz, 1H), 8.02 (dd, J=1.5Hz, 1.5Hz, 1H), 7.80 (d, J=5.4Hz, 1H), 7.84 (d, J=6.3Hz, 1H), 7.76(dd, J=1.5Hz, 1.5Hz, 1H), 7.69 (dd, J=1.5Hz, 1.5Hz, 1H), 7.59?7.64 (m, 5H), 7.30(d, J=5.4Hz, 1H), 7.01?7.16 (m, 1H), 6.89 (q, J=5.4Hz, 1H), 6.52 (q, J=7.8Hz, 1H), 4.00 (s, 3H), 3.99 (s, 3H), 3.98 (s, 3H), 3.96 (s, 3H); 13C NMR (125MHz, CDCl3): delta 181.4, 164.3, 164.3, 164.1, 163.9, 162.1, 159.5 (d, JCF=252.1Hz), 157.9, 157.3, 156.6, 156.4, 155.4, 151.6, 150.7, 150.4, 145.6, 138.4, 137.2, 136.3, 135.8, 135.7, 135.4, 135.2, 128.1, 126.2, 126.1, 125.8, 125.7, 125.1, 122.8, 122.7, 122.1, 121.9, 121.6, 120.0, 119.0, 109.5 (d, JCF=22.7Hz), 53.4, 53.3, 53.2; HRMS (FAB): calcd. for C41H31FN5O8SRu [M+] 874.0921, found 874.0923.

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Li, Chung-Yen; Su, Chaochin; Wang, Hsiou-Hsuan; Kumaresan, Prabakaran; Hsu, Chia-Hsuan; Lee, I-Ting; Chang, Wei-Chun; Tingare, Yogesh S.; Li, Ting-Yu; Lin, Chia-Feng; Li, Wen-Ren; Dyes and Pigments; vol. 100; 1; (2014); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl4?·H2terpy?·H2O (1): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (19.8 mmol) HCl 6 M was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 77percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3).

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, As the paragraph descriping shows that 118949-61-4 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

71071-46-0, Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 1-liter, creased, 4-necked round bottom Pyrex flask equipped with mechanical stirrer, 250-milliliter (ml) addition funnel, temperature probe, heating mantle, and water-cooled total reflux condenser was used. The flask was initially charged with 200 grams (1.08 mole) of ADMA-10 (decyldimethylamine, available from Albemarle Corporation, Baton Rouge, LA), and 239 grams (1.08 mole) decyl bromide was placed in the addition funnel. The stirrer was turned on and the reactor was heated to 65C. The decyl bromide was added dropwise to the ADMA-10 as the temperature of the reactor was allowed to rise from 65C to 142C. The addition funnel was then charged with 110 grams of methanol, and the methanol was added dropwise to the solution as the temperature of the reactor was allowed to fall to 90C. After the entire volume of the methanol was added to the reaction mixture, the heat and stirring were ceased and the intermediate quaternary ammonium (quat-Br) solution was allowed to cool., 71071-46-0

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Patent; ALBEMARLE CORPORATION; WO2005/97729; (2005); A2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI