Day: March 22, 2022

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22348-32-9,(R)-Diphenyl(pyrrolidin-2-yl)methanol,as a common compound, the synthetic route is as follows.

To (S)-diphenylprolinol (4.00 g, 15.8 mmol, 1.00 equiv) in CH2-Cl2 (40 mL) was added imidazole (3.22 g, 47.4 mmol, 3.00 equiv)at 0 C. TMSCl (5.00 mL, 39.5 mmol, 2.50 equiv) was added dropwiseand the reaction was stirred for 12 h at rt. MTBE (100 mL)was added to the reaction and the mixture was filtered. Theorganic phase was washed with H2O (50 mL) and saturated aqueousNaCl (2 50 mL), dried over MgSO4, filtered and concentratedunder reduced pressure to a colorless oil 11 (5.00 g, 15.3 mmol,97%). 1H NMR (400 MHz, CDCl3) d 7.54-7.46 (m, 2H), 7.42-7.36(m, 2H), 7.35-7.20 (m, 6H), 4.07 (t, J = 7.4 Hz, 1H), 2.98-2.75 (m,2H), 1.84-1.72 (m, 1H), 1.68-1.55 (m, 3H), 1.48-1.37 (m, 1H),0.06 (s, 9H) ppm. 13C NMR (101 MHz, CDCl3) d 146.83, 145.78,128.44, 127.61, 127.57, 127.53, 126.90, 126.73, 83.17, 65.42,47.16, 27.51, 25.06, 2.20 ppm. HR-MS (ESI): calculated for (C20H28-NOSi) [M+H]+: 326.1935, found: 326.1937.

22348-32-9, As the paragraph descriping shows that 22348-32-9 is playing an increasingly important role.

Reference：
Article; Murar, Claudia E.; Harmand, Thibault J.; Bode, Jeffrey W.; Bioorganic and Medicinal Chemistry; vol. 25; 18; (2017); p. 4996 – 5001;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

128249-70-7, 2,6-Bis((R)-4-phenyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Zinc(II)tetrafluoroborate hydrate (16mg, 0.068mmol) was added to a solution of (R)-LPh (50mg, 0.135mmol) in acetonitrile (15cm3). The resultant colourless solution was stirred at room temperature for one hour, before the product was precipitated using excess diethyl ether. The white precipitate was collected using vacuum filtration. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.056g, 84%. Elemental microanalysis: found C, 56.7; H, 3.38; N, 8.99%: calcd for C46H38B2F8N6O4Zn C, 56.5; H, 3.92; N, 8.59%. 1H NMR (CD3CN): delta 4.75 (dd, 4H, 10.8, 8,9 Hz, CH), 5.23 (dd, 4H, 10.4, 8.9Hz, ox-H), 5.15 (t, 4H, 10.6Hz, ox-H), 6.76 (d, 8H, 7.2Hz, Ph H2/6), 7.09 (t, 8H, 7.2Hz, Ph H3/5), 7.22 (m, 4H, Ph H4), 8.04 (d, 4H, 7.9Hz, Py H3/5), 8.47 (t, 2H, 7.9Hz, Py H4)., 128249-70-7

As the paragraph descriping shows that 128249-70-7 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

5144-89-8, 1,10-Phenanthroline hydrate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example I 2,9-bis(4methylphenyl)-1,10-phenanthroline (2). A 1.7 M solution of t-butyllithium in pentane (300 mL, 0.510 mol) was added under argon to a stirred suspension of p-iodotoluene (56.04 g, 0.257 mol) in ether (150 mL) at -78 C. The mixture was allowed to warm to room temperature over 1 h. The resulting solution of tolyllithium was added to a solution of 1,10-phenanthroline monohydrate (8.50 g, 0.043 mol) in toluene (100 mL). The resulting dark red solution was stirred under argon for 48 h. The reaction was carefully quenched with water (300 mL) and extracted with CH2 Cl2 (3*150 mL). The combined organic layers were dried (Na2 SO4) and evaporated to a volume of 500 mL under reduced pressure. The solution of crude product was oxidized by stirring with activated MnO2 (60 g). An additional portion of MnO2 (30 g) was added to the reaction after 1 h to ensure complete oxidation. After a total of 2 h, anhydrous MgSO4 (40 g) was added, and the mixture was filtered. The MnO2 /MgSO4 was washed with CH2 Cl2 (300 mL), and the solvent was concentrated to a volume of 50 mL, when a crystalline solid formed. The solution was cooled in ice and filtered. The light yellow product crystals were filtered, washed with one portion of cold toluene (20 mL), and dried. Yield 8.63 g 56%). 1 H NMR (CDCl3) delta8.38 (d, J=8.1 Hz, 4H), 8.29 (d, J=8.5 Hz, 2H), 8.13 (d, J=8.4 Hz, 2H), 7.77 (s, 2H), 7.40 (d, J=8.1 Hz, 4H), 2.47 (s, 6H)., 5144-89-8

As the paragraph descriping shows that 5144-89-8 is playing an increasingly important role.

Reference：
Patent; University of Pittsburgh of the Commonwealth System of Higher Education; US5998594; (1999); A;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, General procedure: A solution of cis-RuII(bpz)2Cl2 (100 mg, 0.205 mmol) and AgNO3 (77 mg, 0.453 mol) in water (25 mL) was heated at reflux for 48 h. After cooling to room temperature, the mixture was filtered through Celite to remove AgCl, and the filtrate was evaporated to dryness. The residue was dissolved in DMF (15 mL) and the solution purged with argon for 15 min. 4,4?-bis(trifluoromethyl)-2,2?-bipyridyl (121 mg, 0.414 mmol) was added and the mixture heated at 100 °C for 24 h under argon. After cooling to room temperature, the solution was evaporated under vacuum to a small volume and diethyl ether (150 mL) added. The precipitate was filtered off and dissolved in a minimum of cold water to which solid NH4PF6 was added. The solid was filtered off and purified by column chromatography as for 1 to give an orange solid. Yield: 73 mg (35percent).

The synthetic route of 71071-46-0 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Coe, Benjamin J.; Peers, Martyn K.; Scrutton, Nigel S.; Polyhedron; vol. 96; (2015); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

118949-61-4, 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of [Ru(p-cymene)Cl2]2 (306 mg, 0.5 mmol) and pybox-ip (301 mg, 1.0 mmol) in MeOH (7.0 mL) wasadded a solution of disodium pyridine-2,6-dicarboxylate (1.0 mmol) in MeOH-H2O (2:1 v/v, 15 mL) under argonatmosphere. The mixture was stirred at 60 oC for 1 h. The product was extracted with CH2Cl2 (40 mL). The combinedorganic layers were concentrated and the residue was purified by silica gel column chromatography withCH2Cl2MeOH (50:1 v/v) to give A* as a dark greenish-violet solid (444.0 mg, 0.78 mmol) in 78% yield.

118949-61-4, 118949-61-4 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine 688211, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Fakhruddin, Ahmad; Abu-Elfotoh, Abdel-Moneim; Shibatomi, Kazutaka; Iwasa, Seiji; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 196 – 205;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

5144-89-8, 1,10-Phenanthroline hydrate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example I 2,9-bis(4methylphenyl)-1,10-phenanthroline (2). A 1.7 M solution of t-butyllithium in pentane (300 mL, 0.510 mol) was added under argon to a stirred suspension of p-iodotoluene (56.04 g, 0.257 mol) in ether (150 mL) at -78 C. The mixture was allowed to warm to room temperature over 1 h. The resulting solution of tolyllithium was added to a solution of 1,10-phenanthroline monohydrate (8.50 g, 0.043 mol) in toluene (100 mL). The resulting dark red solution was stirred under argon for 48 h. The reaction was carefully quenched with water (300 mL) and extracted with CH2 Cl2 (3*150 mL). The combined organic layers were dried (Na2 SO4) and evaporated to a volume of 500 mL under reduced pressure. The solution of crude product was oxidized by stirring with activated MnO2 (60 g). An additional portion of MnO2 (30 g) was added to the reaction after 1 h to ensure complete oxidation. After a total of 2 h, anhydrous MgSO4 (40 g) was added, and the mixture was filtered. The MnO2 /MgSO4 was washed with CH2 Cl2 (300 mL), and the solvent was concentrated to a volume of 50 mL, when a crystalline solid formed. The solution was cooled in ice and filtered. The light yellow product crystals were filtered, washed with one portion of cold toluene (20 mL), and dried. Yield 8.63 g 56%). 1 H NMR (CDCl3) delta8.38 (d, J=8.1 Hz, 4H), 8.29 (d, J=8.5 Hz, 2H), 8.13 (d, J=8.4 Hz, 2H), 7.77 (s, 2H), 7.40 (d, J=8.1 Hz, 4H), 2.47 (s, 6H)., 5144-89-8

As the paragraph descriping shows that 5144-89-8 is playing an increasingly important role.

Reference：
Patent; University of Pittsburgh of the Commonwealth System of Higher Education; US5998594; (1999); A;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, General procedure: A solution of cis-RuII(bpz)2Cl2 (100 mg, 0.205 mmol) and AgNO3 (77 mg, 0.453 mol) in water (25 mL) was heated at reflux for 48 h. After cooling to room temperature, the mixture was filtered through Celite to remove AgCl, and the filtrate was evaporated to dryness. The residue was dissolved in DMF (15 mL) and the solution purged with argon for 15 min. 4,4?-bis(trifluoromethyl)-2,2?-bipyridyl (121 mg, 0.414 mmol) was added and the mixture heated at 100 °C for 24 h under argon. After cooling to room temperature, the solution was evaporated under vacuum to a small volume and diethyl ether (150 mL) added. The precipitate was filtered off and dissolved in a minimum of cold water to which solid NH4PF6 was added. The solid was filtered off and purified by column chromatography as for 1 to give an orange solid. Yield: 73 mg (35percent).

The synthetic route of 71071-46-0 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Coe, Benjamin J.; Peers, Martyn K.; Scrutton, Nigel S.; Polyhedron; vol. 96; (2015); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.71071-46-0,Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate,as a common compound, the synthetic route is as follows.

71071-46-0, General procedure: A solution of cis-RuII(bpz)2Cl2 (100 mg, 0.205 mmol) and AgNO3 (77 mg, 0.453 mol) in water (25 mL) was heated at reflux for 48 h. After cooling to room temperature, the mixture was filtered through Celite to remove AgCl, and the filtrate was evaporated to dryness. The residue was dissolved in DMF (15 mL) and the solution purged with argon for 15 min. 4,4?-bis(trifluoromethyl)-2,2?-bipyridyl (121 mg, 0.414 mmol) was added and the mixture heated at 100 °C for 24 h under argon. After cooling to room temperature, the solution was evaporated under vacuum to a small volume and diethyl ether (150 mL) added. The precipitate was filtered off and dissolved in a minimum of cold water to which solid NH4PF6 was added. The solid was filtered off and purified by column chromatography as for 1 to give an orange solid. Yield: 73 mg (35percent).

The synthetic route of 71071-46-0 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Coe, Benjamin J.; Peers, Martyn K.; Scrutton, Nigel S.; Polyhedron; vol. 96; (2015); p. 57 – 65;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min), 22348-32-9

The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI