Month: March 2022

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min)

22348-32-9, The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min)

22348-32-9, The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, As the paragraph descriping shows that 118949-61-4 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min)

22348-32-9, The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

118949-61-4, 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of [Ru(p-cymene)Cl2]2 (306 mg, 0.5 mmol) and pybox-ip (301 mg, 1.0 mmol) in MeOH (7.0 mL) wasadded a solution of disodium pyridine-2,6-dicarboxylate (1.0 mmol) in MeOH-H2O (2:1 v/v, 15 mL) under argonatmosphere. The mixture was stirred at 60 oC for 1 h. The product was extracted with CH2Cl2 (40 mL). The combinedorganic layers were concentrated and the residue was purified by silica gel column chromatography withCH2Cl2MeOH (50:1 v/v) to give A* as a dark greenish-violet solid (444.0 mg, 0.78 mmol) in 78% yield.

118949-61-4, 118949-61-4 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine 688211, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Fakhruddin, Ahmad; Abu-Elfotoh, Abdel-Moneim; Shibatomi, Kazutaka; Iwasa, Seiji; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 196 – 205;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

118949-61-4, 2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, The synthetic route of 118949-61-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15862-19-8,5-Bromo-2,2′-bipyridine,as a common compound, the synthetic route is as follows.,15862-19-8

5-bromo-2,2-bipyridine (0.480 g, 2 mmol), 2-methylthiophene (0.401 g, 4 mmol) and KOAc (0.401 g, 4 mmol) in dryDMA (5 mL) were stirred under N2 at 150 C for 20 h in thepresence of Pd(OAc)2 (0.009 g, 2 mol%). After cooling the solution to room temperature, CH2Cl2 (15 mL) and an aqueoussaturated NH4Cl solution (10 mL) were added. The reactionsolution was extracted three times with 15 mL of CH2Cl2, andthe combined organic layers were washed three times with 10mL of water. The solvent was evaporated under reduced pressure, and the crude product was purified by using columnchromatography (silica; 5:1 v/v hexane:EtOAc) to afford compound 1 in 22% yield (111 mg). 1H NMR (CDCl3, 500 MHz): 8.89 (dd, 1H, J = 2.3 and 0.6 Hz, ArH), 8.68 (ddd, 1H, J = 4.7,1.7 and 0.8 Hz, ArH), 8.448.36 (m, 2H, ArH), 7.93 (dd, 1H,J = 8.3 and 2.4 Hz, ArH), 7.82 (td, 1H, J = 7.8 and 1.8 Hz,ArH), 7.30 (ddd, 1H, J = 7.4, 4.8 and 1.1 Hz, ArH), 7.24(d, 1H, J = 3.5 Hz, ArH), 6.826.77 (m, 1H, ArH), 2.54 (s,3H, ArCH3) ppm. HR-MS (ESI+) m/z [M + H]+ calcd. for[C15H13N2S]+ 253.0799; found: 253.0803.

As the paragraph descriping shows that 15862-19-8 is playing an increasingly important role.

Reference：
Article; Kamila, Mritunjoy; Cosquer, Goulven; Breedlove, Brian K.; Yamashita, Masahiro; Bulletin of the Chemical Society of Japan; vol. 90; 5; (2017); p. 595 – 603;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15862-19-8,5-Bromo-2,2′-bipyridine,as a common compound, the synthetic route is as follows.,15862-19-8

5-bromo-2,2-bipyridine (0.480 g, 2 mmol), 2-methylthiophene (0.401 g, 4 mmol) and KOAc (0.401 g, 4 mmol) in dryDMA (5 mL) were stirred under N2 at 150 C for 20 h in thepresence of Pd(OAc)2 (0.009 g, 2 mol%). After cooling the solution to room temperature, CH2Cl2 (15 mL) and an aqueoussaturated NH4Cl solution (10 mL) were added. The reactionsolution was extracted three times with 15 mL of CH2Cl2, andthe combined organic layers were washed three times with 10mL of water. The solvent was evaporated under reduced pressure, and the crude product was purified by using columnchromatography (silica; 5:1 v/v hexane:EtOAc) to afford compound 1 in 22% yield (111 mg). 1H NMR (CDCl3, 500 MHz): 8.89 (dd, 1H, J = 2.3 and 0.6 Hz, ArH), 8.68 (ddd, 1H, J = 4.7,1.7 and 0.8 Hz, ArH), 8.448.36 (m, 2H, ArH), 7.93 (dd, 1H,J = 8.3 and 2.4 Hz, ArH), 7.82 (td, 1H, J = 7.8 and 1.8 Hz,ArH), 7.30 (ddd, 1H, J = 7.4, 4.8 and 1.1 Hz, ArH), 7.24(d, 1H, J = 3.5 Hz, ArH), 6.826.77 (m, 1H, ArH), 2.54 (s,3H, ArCH3) ppm. HR-MS (ESI+) m/z [M + H]+ calcd. for[C15H13N2S]+ 253.0799; found: 253.0803.

As the paragraph descriping shows that 15862-19-8 is playing an increasingly important role.

Reference：
Article; Kamila, Mritunjoy; Cosquer, Goulven; Breedlove, Brian K.; Yamashita, Masahiro; Bulletin of the Chemical Society of Japan; vol. 90; 5; (2017); p. 595 – 603;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

71071-46-0, Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 1-liter, creased, 4-necked round bottom Pyrex flask equipped with mechanical stirrer, 250-milliliter (ml) addition funnel, temperature probe, heating mantle, and water-cooled total reflux condenser was used. The flask was initially charged with 200 grams (1.08 mole) of ADMA-10 (decyldimethylamine, available from Albemarle Corporation, Baton Rouge, LA), and 239 grams (1.08 mole) decyl bromide was placed in the addition funnel. The stirrer was turned on and the reactor was heated to 65C. The decyl bromide was added dropwise to the ADMA-10 as the temperature of the reactor was allowed to rise from 65C to 142C. The addition funnel was then charged with 110 grams of methanol, and the methanol was added dropwise to the solution as the temperature of the reactor was allowed to fall to 90C. After the entire volume of the methanol was added to the reaction mixture, the heat and stirring were ceased and the intermediate quaternary ammonium (quat-Br) solution was allowed to cool., 71071-46-0

71071-46-0 Dimethyl [2,2′-bipyridine]-4,4′-dicarboxylate 326419, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Patent; ALBEMARLE CORPORATION; WO2005/97729; (2005); A2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI