Reference of 1120-02-1, A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 1120-02-1, Name is OctMAB, molecular formula is C21H46BrN. In a Article，once mentioned of 1120-02-1
Sulfonated poly(ether ether ketone) (sPEEK)/mesoporous benzene-silica electrolyte composite membranes were prepared using a solvent casting method. The two components were mixed thoroughly in N,N-dimethyl acetamide, at various concentrations up to 20 wt% of the mesoporous benzene-silica powder. The degree of sulfonation was 65% for sPEEK, and the ion-exchange capacity of mesoporous benzene-silica was 0.60 mequiv./g. The mesoporous benzene-silica material had a 2D hexagonal (p6mm) mesostructure with a pore diameter of 2.7 nm. The composite membranes exhibited higher proton conductivities than a pristine sPEEK membrane, and the proton conductivity increased with temperature. However, the sPEEK-based composite membranes showed very low methanol crossover below 5 × 10-7 cm2/s, but this value was still in the same range as the pristine sPEEK membrane. A maximum proton conductivity of 0.079 S/cm was obtained for the sPEEK-OMB15 membrane at 80 C, and the highest DMFC cell performance was at 56 mW/cm2, which were approximately 119 and 37% increases compared to the pristine sPEEK membrane, respectively.
Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.Reference of 1120-02-1, you can also check out more blogs about1120-02-1
Reference：
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI