Category: 1148-79-4

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl4?·H2terpy?·H2O (1): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (19.8 mmol) HCl 6 M was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 77percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3).

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

UO2Cl4?·(H2terpy)2?·2Cl (2): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (63 mmol) acetonitrile was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 69percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

1148-79-4 2,2′:6′,2”-Terpyridine 70848, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

Solid [Co(H2O)6](ClO4)2 (10.0 mg, 21.8 lmol) was placed at thebottom of a 4.0 cm3 test tube with 0.50 cm3 of dmso. Then the tubewas slowly filled with 2.50 cm3 of a dmso?CH3OH mixture (1:4 v/v)containing terpy (15.0 mg, 64.4 lmol). Finally, 1 (15.0 mg,9.01 lmol) dissolved in 0.50 cm3 of CH3OH was placed on the topand the tube covered with parafilm. X-ray quality deep browncrystals of 2 were grown in the text tube by slow diffusion at roomtemperature during 25 days. Yield: 3.20 mg (1.30 lmol, 29percent). X-rayabsorption microanalysis for 2: 3:2 Co/Nb molar ratio. Elementalanalysis for C105H86N18O33Co3Nb2 (2490.52 g mol1) ? Exp. (Calc.):percentC 51.55 (50.94), percentH 3.02 (3.18), percentN 10.49 (10.32), percentCo 7.50 (7.30)percent.IR (KBr disk/cm1): 3475 [m(O?H)], 3062 and 2930 [m(C?H)], 1715and 1687 [mas(CO)], 1641 [m(CN)], 1470 and 1448 [m(CC)],1401 [ms(CO)], 905 [m(NbO] and 421 [m(CoAN)].

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Oliveira, Willian X.C.; Pereira, Cynthia L.M.; Pinheiro, Carlos B.; Krambrock, Klaus; Grancha, Thais; Moliner, Nicolas; Lloret, Francesc; Julve, Miguel; Polyhedron; vol. 117; (2016); p. 710 – 717;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

UO2Cl4?·(H2terpy)2?·2Cl (2): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (63 mmol) acetonitrile was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 69percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

1148-79-4 2,2′:6′,2”-Terpyridine 70848, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

Solid [Co(H2O)6](ClO4)2 (10.0 mg, 21.8 lmol) was placed at thebottom of a 4.0 cm3 test tube with 0.50 cm3 of dmso. Then the tubewas slowly filled with 2.50 cm3 of a dmso?CH3OH mixture (1:4 v/v)containing terpy (15.0 mg, 64.4 lmol). Finally, 1 (15.0 mg,9.01 lmol) dissolved in 0.50 cm3 of CH3OH was placed on the topand the tube covered with parafilm. X-ray quality deep browncrystals of 2 were grown in the text tube by slow diffusion at roomtemperature during 25 days. Yield: 3.20 mg (1.30 lmol, 29percent). X-rayabsorption microanalysis for 2: 3:2 Co/Nb molar ratio. Elementalanalysis for C105H86N18O33Co3Nb2 (2490.52 g mol1) ? Exp. (Calc.):percentC 51.55 (50.94), percentH 3.02 (3.18), percentN 10.49 (10.32), percentCo 7.50 (7.30)percent.IR (KBr disk/cm1): 3475 [m(O?H)], 3062 and 2930 [m(C?H)], 1715and 1687 [mas(CO)], 1641 [m(CN)], 1470 and 1448 [m(CC)],1401 [ms(CO)], 905 [m(NbO] and 421 [m(CoAN)].

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Oliveira, Willian X.C.; Pereira, Cynthia L.M.; Pinheiro, Carlos B.; Krambrock, Klaus; Grancha, Thais; Moliner, Nicolas; Lloret, Francesc; Julve, Miguel; Polyhedron; vol. 117; (2016); p. 710 – 717;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl2(terpy) (3): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine, 2.3 ml (19 mmol) acetonitrile and 1.1 ml (12 mmol) pyridine was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 79percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3)., 1148-79-4

As the paragraph descriping shows that 1148-79-4 is playing an increasingly important role.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

Solid [Co(H2O)6](ClO4)2 (10.0 mg, 21.8 lmol) was placed at thebottom of a 4.0 cm3 test tube with 0.50 cm3 of dmso. Then the tubewas slowly filled with 2.50 cm3 of a dmso?CH3OH mixture (1:4 v/v)containing terpy (15.0 mg, 64.4 lmol). Finally, 1 (15.0 mg,9.01 lmol) dissolved in 0.50 cm3 of CH3OH was placed on the topand the tube covered with parafilm. X-ray quality deep browncrystals of 2 were grown in the text tube by slow diffusion at roomtemperature during 25 days. Yield: 3.20 mg (1.30 lmol, 29percent). X-rayabsorption microanalysis for 2: 3:2 Co/Nb molar ratio. Elementalanalysis for C105H86N18O33Co3Nb2 (2490.52 g mol1) ? Exp. (Calc.):percentC 51.55 (50.94), percentH 3.02 (3.18), percentN 10.49 (10.32), percentCo 7.50 (7.30)percent.IR (KBr disk/cm1): 3475 [m(O?H)], 3062 and 2930 [m(C?H)], 1715and 1687 [mas(CO)], 1641 [m(CN)], 1470 and 1448 [m(CC)],1401 [ms(CO)], 905 [m(NbO] and 421 [m(CoAN)].

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Oliveira, Willian X.C.; Pereira, Cynthia L.M.; Pinheiro, Carlos B.; Krambrock, Klaus; Grancha, Thais; Moliner, Nicolas; Lloret, Francesc; Julve, Miguel; Polyhedron; vol. 117; (2016); p. 710 – 717;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1148-79-4,2,2′:6′,2”-Terpyridine,as a common compound, the synthetic route is as follows.

Solid [Co(H2O)6](ClO4)2 (10.0 mg, 21.8 lmol) was placed at thebottom of a 4.0 cm3 test tube with 0.50 cm3 of dmso. Then the tubewas slowly filled with 2.50 cm3 of a dmso?CH3OH mixture (1:4 v/v)containing terpy (15.0 mg, 64.4 lmol). Finally, 1 (15.0 mg,9.01 lmol) dissolved in 0.50 cm3 of CH3OH was placed on the topand the tube covered with parafilm. X-ray quality deep browncrystals of 2 were grown in the text tube by slow diffusion at roomtemperature during 25 days. Yield: 3.20 mg (1.30 lmol, 29percent). X-rayabsorption microanalysis for 2: 3:2 Co/Nb molar ratio. Elementalanalysis for C105H86N18O33Co3Nb2 (2490.52 g mol1) ? Exp. (Calc.):percentC 51.55 (50.94), percentH 3.02 (3.18), percentN 10.49 (10.32), percentCo 7.50 (7.30)percent.IR (KBr disk/cm1): 3475 [m(O?H)], 3062 and 2930 [m(C?H)], 1715and 1687 [mas(CO)], 1641 [m(CN)], 1470 and 1448 [m(CC)],1401 [ms(CO)], 905 [m(NbO] and 421 [m(CoAN)].

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Oliveira, Willian X.C.; Pereira, Cynthia L.M.; Pinheiro, Carlos B.; Krambrock, Klaus; Grancha, Thais; Moliner, Nicolas; Lloret, Francesc; Julve, Miguel; Polyhedron; vol. 117; (2016); p. 710 – 717;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI